Vfswowl Axisflying Cineon C35 V3 Review (2026): A Spec-Based Look
Analyze the key specifications of this 3.5-inch cinewhoop drone. Understand the 6S power setup, F745 AIO flight controller, and BNF receiver hardware to prepare your flight gear.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This vfswowl axisflying cineon c35 v3 review examines a compact 3.5-inch cinewhoop drone built for FPV flight. Two specifications define this craft: its 6S power configuration and the onboard F745 AIO V4.6.0 flight controller paired with an ICM-42688-P gyro. The model ships with AM32 V2.16 firmware in a Bind-and-Fly format. Published specifications list dimensions of 0.39 inches on each side with an overall weight of 1.76 ounces. If you fly 6S power setups, these core specifications determine how the aircraft integrates with your gear.
- 3.5-inch cinewhoop airframe configured for 6S power systems
- F745 AIO V4.6.0 flight controller with ICM-42688-P gyro
- AM32 V2.16 speed controller firmware
- Receiver configurations for O4 PRO ELRS 915, ELRS 2.4G, and TBS 915
Good fit for
This drone fits FPV pilots who fly 6S battery packs and want a pre-built 3.5-inch cinewhoop. Because it comes in BNF format, you can connect your existing transmitter directly. The hardware options accommodate pilots using ExpressLRS on 915 MHz, ExpressLRS on 2.4 GHz, or TBS Crossfire on 915 MHz protocols. If your setup relies on an F745 processor and AM32 ESC firmware, this quadcopter matches your gear requirements.
Who can skip it
You should skip this drone if you use 4S batteries, as the listing specifies a 6S system. It is also not suitable if you want a complete ready-to-fly kit. Because it is sold as a BNF drone, the package does not include a radio controller, battery, or FPV goggles. Pilots flying radio control protocols outside of ELRS 915, ELRS 2.4G, or TBS 915 will need to look elsewhere.
Verdict
The Vfswowl Axisflying Cineon C35 V3 delivers a 3.5-inch 6S BNF cinewhoop platform built around an F745 processor and ICM-42688-P gyro. It offers straightforward hardware options for pilots using ELRS or TBS radio links.
Key Specifications and Practical Meanings
Size: O4 PRO ELRS 915
This designation indicates the pre-installed receiver hardware using the 915 MHz ExpressLRS protocol. In daily flying, this sub-GHz frequency delivers solid signal penetration through obstacles like trees or walls. You benefit if you already own a 915 MHz ELRS transmitter and fly near structures. When shopping for FPV drones, compare this with 2.4 GHz systems, which offer smaller antennas but lower penetration range.
Weight: 1.76 ounces
This listed mass equals approximately 50 grams for the specified assembly. In everyday handling, a lightweight airframe stays agile and reduces impact force during minor crashes. You benefit if you prioritize nimble maneuvers and easy transport inside a small field pack. When comparing drones and action camera platforms, evaluate this bare weight against all-up flight weights that factor in heavy LiPo packs and recording cameras.
Format: 6S BNF
Bind-and-Fly means the drone arrives assembled with motors and electronics, requiring only binding to your compatible radio control. Everyday use skips soldering and component mounting. You benefit if you want an operational craft right out of the packaging rather than building from parts. When shopping for action camera quads, compare BNF models to Plug-and-Play units, which omit the internal receiver and demand manual installation.
Design: 3.5in Cinewhoop Drone
A 3.5-inch cinewhoop layout uses ducted prop protection around three-and-a-half-inch blades. In practical flights, the enclosed guards shield nearby subjects and the craft during indoor or close-proximity tracking. You benefit if you film near people or through tight indoor gaps. When shopping for video drones, compare 3.5-inch cinewhoops with open-prop five-inch freestyle rigs, which fly faster outdoors but lack enclosed safety shrouds.
Design, Dimensions, and Frame Build
The Vfswowl Axisflying Cineon C35 V3 uses a 3.5-inch cinewhoop layout designed specifically for FPV flight and close-proximity navigation. According to the listing, the drone has exterior dimensions of 0.39 inches in length, 0.39 inches in width, and 0.39 inches in height. In practice, the published 3.5-inch class defines the functional footprint, incorporating prop guard protection for reliable operation around obstacles.
According to the listing, the model carries a weight of 1.76 ounces and comes in a single exterior finish noted as One Color. A lightweight frame of this profile reduces momentum, helping you keep tight control in confined spaces. As a Bind-and-Fly (BNF) airframe, the physical layout integrates the core electronics into the frame rather than requiring you to wire separate components.
Hardware control integration depends on your chosen receiver configuration. The listing offers three size options: O4 PRO ELRS 915, O4 PRO ELRS 2.4G, and O4 PRO TBS 915. Each variant establishes a dedicated control link to match your existing transmitter hardware. This gives you a ready-to-bind 3.5-inch cinewhoop platform tuned to your preferred control gear straight from the box.
Hardware Setup and Daily Flight Operations
The Vfswowl Axisflying Cineon C35 V3 arrives as a BNF (Bind-and-Fly) craft. To get in the air, you must pair the pre-installed receiver with a compatible transmitter. The model offers three receiver configurations: ExpressLRS 915 MHz, ExpressLRS 2.4 GHz, or TBS 915 MHz. Your radio must match the specific frequency and protocol of your chosen build. Because it uses a 6S power architecture, you also need to supply 6S batteries and an appropriate balance charger. Initial setup requires connecting the onboard F745 AIO V4.6.0 flight controller to your computer to verify receiver channel mapping and check the ICM-42688-P gyro.
In daily use, the drone relies on AM32 V2.16 ESC firmware to manage motor output from your 6S power packs. Flight preparation involves strapping on a battery, connecting the main power lead, and checking radio link. The 3.5-inch cinewhoop design targets FPV flying. The listing records physical dimensions of 0.39 by 0.39 by 0.39 inches and an overall weight of 1.76 ounces, allowing for compact transport between locations. Everyday operation centers on routine battery swaps and maintaining signal link across your selected O4 PRO control frequency.
Key Factors Before You Buy
The Vfswowl Axisflying Cineon C35 V3 is a BNF quadcopter, meaning you must provide essential flight equipment separately. You need a dedicated 6S battery pack, a matching balanced charger, and compatible FPV video goggles. Carefully verify that your radio transmitter matches the specific receiver variant you choose: O4 PRO ELRS 915, O4 PRO ELRS 2.4G, or O4 PRO TBS 915.
Routine upkeep involves inspecting frame screws, checking propellers, and managing the F745 AIO V4.6.0 flight controller and AM32 V2.16 ESC configurations. You must also monitor ICM-42688-P gyro calibration after rough flights.
Among the 1 options in Drones & Action Cameras for 2026, this model fits pilots who already own field equipment. It serves as a specialized cinewhoop platform rather than an all-in-one starter bundle.
Check before you buy
- Check your transmitter protocol matches your chosen receiver variant: ELRS 915, ELRS 2.4G, or TBS 915.
- Confirm you own a 6S battery pack and a compatible balance charger.
- Ensure you have compatible FPV goggles ready for flight operation.
- Verify your setup supports the F745 AIO V4.6.0 controller and AM32 V2.16 ESC.
Vfswowl Axisflying Cineon C35 V3 Drone
Best for: 6S FPV pilots needing a 3.5-inch cinewhoop
- Dimensions
- 0.39 × 0.39 × 0.39 inches
- Weight
- 1.76 ounces
This 3.5-inch cinewhoop drone runs on a 6S power setup and uses an F745 AIO flight controller paired with an ICM-42688-P gyro. It comes as a bind-and-fly build with an AM32 V2.16 ESC configuration. If you already own compatible FPV goggles and an ELRS or TBS transmitter, this platform gives you a compact quad for stabilized indoor or outdoor video.
- Equipped with an F745 AIO V4.6.0 flight controller
- Uses an ICM-42688-P gyroscope sensor
- Pre-flashed AM32 V2.16 ESC firmware
- Offers ELRS 915MHz, ELRS 2.4GHz, and TBS 915MHz receiver configurations
- Built for 6S power setups
- BNF format requires you to supply your own radio transmitter, goggles, and battery
- Limited to a single color finish
- You fly with 6S battery configurations.
- You need a 3.5-inch cinewhoop frame for FPV recording.
- You already operate an ELRS or TBS radio protocol.
- You need an all-in-one kit that includes a handheld remote and flight battery.
- You build specifically around 4S power systems.
Verdict: Vfswowl Axisflying Cineon C35 V3 Cinewhoop Drone provides an F745-driven 6S flight stack tailored for experienced pilots who want to bind their own ELRS or TBS gear to a 3.5-inch platform.
Specifications side by side
| Spec | Vfswowl Axisflying Cineon C35 V3 Drone |
|---|---|
| Dimensions | 0.39 × 0.39 × 0.39 inches |
| Weight | 1.76 ounces |
| Size | O4 PRO ELRS 915 |
| Color | One Color |
| Model | Vfswowl564654 |
Frequently asked questions
Who is the Vfswowl Axisflying Cineon C35 V3 best suited for?
The Vfswowl Axisflying Cineon C35 V3 is built specifically for experienced 6S FPV pilots needing a 3.5-inch cinewhoop platform. The hardware configuration requires familiarity with custom flight setups and external radio gear. Pilots looking to bind existing ELRS or TBS transmitters will find this specialized drone ready for advanced cinewhoop flights.
What is the listed weight of the Vfswowl Axisflying Cineon C35 V3?
According to the manufacturer specifications, the drone has a listed weight of 1.76 ounces. This measurement reflects the bare craft without added components. When you prepare for flight, keep in mind that mounting your 6S flight battery, action camera, and required antennas will increase the total operational takeoff weight.
What flight controller hardware runs the Cineon C35 V3?
The Cineon C35 V3 runs on an F745-driven flight stack designed for responsive multirotor handling. This onboard processor manages flight stabilization and commands sent from your radio transmitter. Paired with 6S power components, the processing stack delivers the computation speed necessary for tight cinewhoop maneuvering in close spaces.
What color and model options are listed for this drone?
The drone is cataloged under model number Vfswowl564654 and comes in a single One Color finish. Unlike consumer drones with varied styling choices, this cinewhoop focuses on functional hardware. Its dark, uniform finish gives the quadcopter a clean appearance while housing the core electronic flight components securely inside.
What protocol does the O4 PRO ELRS 915 model use?
The O4 PRO ELRS 915 configuration uses the 915 MHz ExpressLRS open-source radio control protocol. Operating at this sub-GHz frequency provides reliable control link stability around solid obstacles. To control this unit, you must have an ExpressLRS radio controller or external module configured to transmit on 915 MHz.
What external gear do you need to fly the Cineon C35 V3?
Because this drone ships as a BNF quadcopter, you must supply your own 6S battery, compatible charger, FPV goggles, and radio controller. The craft does not include an all-in-one controller or integrated display. You need to bind your existing gear to the onboard receiver before heading out to fly.
