Henrixonzx Bee35 Bee35 Pro 3.5 Review: Specs, Pros and Cons
Analyze the Henrixonzx Bee35 Pro cinewhoop through published specifications. Review its 3.5-inch frame, 1.76-ounce weight, 6S power profile, and Analog ELRS receiver before you buy gear.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This henrixonzx bee35 bee35 pro 3 5 review covers a compact cinewhoop built for RC quad flying. The model Henrixonzx26 is defined by its 3.5-inch platform size and its 6S power setup. Designed for close-proximity video capture, this quadcopter features an Analog ELRS configuration in this specific listing. Published specifications indicate a listed weight of 1.76 ounces, alongside dimensions measuring 0.39 inches in length, width, and height. If you need a dedicated 6S cinewhoop platform with ExpressLRS protocol support out of the box, these published specifications outline the core baseline.
- 3.5-inch cinewhoop airframe configured for 6S power systems
- Analog video transmission paired with an ELRS receiver protocol
- Published lightweight frame specification of 1.76 ounces
- Three available receiver options including Analog ELRS, Analog TBS, and PW Version
Good fit for
You should consider this drone if you already fly with an ExpressLRS radio transmitter and analog FPV goggles. The 6S battery specification caters to pilots who prioritize high-voltage setups for their flights. At a published weight of 1.76 ounces with a 3.5-inch cinewhoop profile, it suits pilots who need a compact airframe for indoor or close-quarters RC quad flying without switching to digital video receiver hardware.
Who can skip it
You should skip this model if your setup relies on digital HD video systems, as this listing specifies analog transmission. Pilots running TBS Crossfire transmitters should avoid this specific ELRS configuration unless choosing the TBS variation. If you require built-in GPS navigation, autonomous flight modes, or alternate battery voltages outside a 6S configuration, this platform does not list those capabilities and will not match your requirements.
Verdict
The Henrixonzx Bee35 Pro delivers a dedicated 3.5-inch, 6S cinewhoop platform configured for analog video and ELRS control. It serves as a direct fit for pilots invested in high-voltage analog RC quad setups.
Key Specs Explained
Weight: 1.76 ounces
A weight of 1.76 ounces indicates an exceptionally light build for a drone chassis. In everyday use, lighter hardware improves flight agility and reduces momentum during sudden stops. Buyers seeking minimal carrying mass for portable travel gear will benefit from this spec. When comparing FPV quads, match this figure against standard frame weights to evaluate overall payload capacity.
Size: Analog ELRS
This spec pairs an analog video signal with an ExpressLRS radio receiver protocol. In practice, this setup provides low-latency control links and direct video feeds without complex digital pairing. Pilots using compatible open-source transmitters benefit from reliable long-distance connection commands. When shopping for FPV models, check your current radio controller protocol against this transmission standard to confirm compatibility before purchasing.
Size options: Analog ELRS, Analog TBS, PW Version
Three hardware variations give you choices across different receiver ecosystems. Selecting between ELRS and TBS protocols lets you integrate the aircraft directly into your established radio controller gear. Buyers with pre-existing transmitter gear benefit by avoiding extra adapter modules. When evaluating FPV drones, compare these option types against your existing ground station hardware to ensure your controller matches the specific receiver protocol listed.
Height: 0.39 inches
The listed height of 0.39 inches reflects the low-profile vertical measurement of the unit. In practical flight use, an ultra-low vertical profile minimizes aerodynamic drag during forward flight. FPV pilots wanting reduced air resistance for cinematic lines benefit from such slim frame geometry. When shopping for quadcopters, evaluate overall vertical clearance against your battery mounting straps and onboard hardware clearance needs.
Design and Frame Build Specifications
The Henrixonzx Bee35 Pro is built as a 3.5-inch cinewhoop drone platform for FPV quad flying. According to the listing, the unit measures 0.39 inches long, 0.39 inches wide, and 0.39 inches high, with a specified weight of 1.76 ounces. These compact frame figures give you a very small overall profile that is simple to stow in a gear bag. A 3.5-inch class frame gives you the agility to navigate tight spaces without requiring substantial storage room.
For control and hardware layouts, the platform offers three size configurations: Analog ELRS, Analog TBS, and a PW Version. Choosing between ELRS and TBS options lets you match the drone to your existing radio transmitter setup without needing external receiver hardware. The build is designated for 6S power setups, meaning you can deploy high-voltage batteries that maintain stable electrical output during demanding flight lines.
The exterior comes in a One Color finish, according to the listing, providing a standard aesthetic across the airframe. The Henrixonzx26 model design focuses entirely on direct compatibility with selected control protocols. Each variation maintains the same 0.39-inch height profile, ensuring that frame clearance stays consistent regardless of the receiver package you select.
Setup Workflow and Everyday Operation
Setting up the Henrixonzx Bee35 Pro requires matching your radio and power equipment to its published configuration. Because this model uses an Analog ELRS setup, you must bind the onboard ExpressLRS receiver to a compatible ELRS transmitter. If you select the Analog TBS or PW Version options, you must pair them with their respective radio systems instead. You also need an analog FPV display or goggles to receive the video feed.
Powering the quad requires a 6S battery setup. You must supply your own 6S power packs and an appropriate balance charger to operate the system. Before each flight, verify that battery voltage matches standard 6S operational ranges. Connecting the battery supplies power to both the internal flight components and the analog video transmitter.
In daily use, the 3.5-inch cinewhoop format provides a dedicated platform for close-quarters RC quad flying. Routine operation involves checking prop clearances around the 3.5-inch layout and confirming signal lock between your transmitter and the ELRS module. The compact dimensions and 1.76-ounce listed weight keep storage simple in standard gear bags. You simply recharge your 6S packs, check the video channel, and manage your flight equipment between sessions.
Key Buying Considerations for the Bee35
Before you choose this quadcopter, evaluate the gear required to support it. The drone runs on a 6S electrical profile, meaning you must provide your own compatible 6S batteries and balance charger. Because this model comes in Analog ELRS, Analog TBS, and PW Version options, you need to verify which receiver protocol fits your existing radio transmitter. Operating an analog FPV cinewhoop also requires dedicated analog video goggles or an external monitor to view footage. General upkeep for a 3.5-inch cinewhoop involves checking structural screws, motor mounts, and prop clearances after regular use. Within the Drones & Action Cameras space, this 1.76-ounce platform serves pilots who prefer modular FPV hardware over all-in-one consumer camera craft. Matching your controller gear, video receiver, and battery kit to the published Henrixonzx26 specs ensures proper operation right out of the box.
Check before you buy
- Confirm your radio transmitter protocol matches the Analog ELRS, Analog TBS, or PW Version variant.
- Verify you own 6S battery packs and a compatible 6S charger.
- Ensure you have analog FPV goggles or a monitor for video reception.
- Check that 3.5-inch cinewhoop dimensions fit your planned flight spaces.
Henrixonzx Bee35 Pro 3.5-Inch 6S Cinewhoop
Best for: Analog FPV pilots running 6S power systems
- Dimensions
- 0.39 × 0.39 × 0.39 inches
- Weight
- 1.76 ounces
The Henrixonzx Bee35 Pro is a 3.5-inch cinewhoop drone designed for 6S power setups. Weighing 1.76 ounces, this model uses an Analog ELRS receiver configuration. It fits quad setups needing compact 0.39-inch frame dimensions. If you fly analog FPV gear and run 6S batteries, this build provides a dedicated platform for small-scale cinewhoop flights.
- Configured for 6S battery power systems
- Lightweight 1.76-ounce listed weight
- Offers Analog ELRS, Analog TBS, and PW receiver options
- Listed receiver options do not include digital FPV systems
- Available in only one color finish
- You want a 3.5-inch cinewhoop frame built for 6S battery setups.
- You fly using Analog ELRS or Analog TBS radio protocols.
- You require a pre-installed digital video transmission system.
- You need multiple color scheme options for your build.
Verdict: Henrixonzx Bee35 Pro 3.5-Inch 6S Cinewhoop fits pilots who want a lightweight 1.76-ounce airframe wired for 6S voltage and analog control. It suits analog FPV hobbyists building a dedicated 3.5-inch quad for close-proximity cinewhoop flights.
Specifications side by side
| Spec | Henrixonzx Bee35 Pro 3.5-Inch 6S Cinewhoop |
|---|---|
| Dimensions | 0.39 × 0.39 × 0.39 inches |
| Weight | 1.76 ounces |
| Size | Analog ELRS |
| Color | One Color |
| Model | Henrixonzx26 |
Frequently asked questions
What radio receiver system does the Henrixonzx Bee35 Pro use?
The Henrixonzx Bee35 Pro uses an Analog ELRS configuration. You will need an ExpressLRS radio transmitter to establish a control link with the quadcopter. This setup gives you open-source radio communication matched to analog video gear for your proximity cinewhoop flights.
What battery voltage is the Henrixonzx Bee35 Pro designed to run on?
This cinewhoop platform is designed specifically for 6S power systems. You need 6S flight packs to operate the electronics properly. Higher voltage configurations deliver consistent power delivery to the motors throughout each flight session without causing excessive voltage sag under heavy throttle demands.
What size drone frame is the Henrixonzx Bee35 Pro?
The Henrixonzx Bee35 Pro is built as a 3.5-inch cinewhoop drone platform. It is classified under model number Henrixonzx26. This 3.5-inch footprint provides a compact layout suitable for maneuvering around obstacles and operating in tight spaces during close-proximity video production.
Is the Henrixonzx Bee35 Pro compatible with digital FPV goggles?
The published specifications list this quadcopter with an analog setup rather than a digital video system. To receive video from the craft, you must use analog FPV goggles or an analog ground receiver module. It does not list native support for digital video transmitters.
How much does the Henrixonzx Bee35 Pro weigh?
The published weight for the Henrixonzx Bee35 Pro is 1.76 ounces. This light airframe helps minimize total craft inertia during quick maneuvers. Because the listed weight reflects the bare hardware, adding your chosen battery pack and accessories will increase the total operational takeoff mass.
What are the physical dimensions of the Henrixonzx Bee35 Pro frame?
The manufacturer specifications list dimensions of 0.39 inches in length, 0.39 inches in width, and 0.39 inches in height. These compact measurements define an ultra-small profile on paper. You should account for the sweep of standard 3.5-inch props when planning your storage space.
What color options are available for the Henrixonzx Bee35 Pro?
The Henrixonzx Bee35 Pro comes strictly in a single finish designated as One Color in the manufacturer data. There are no alternate colorways or multi-tone frame kits listed for model Henrixonzx26. You receive the standard factory color scheme straight out of the box.
