Vfswowl Talon 2in 106mm CineWhoop Review: Specs, Pros and Cons
Understand the hardware specs of the Vfswowl Talon 106mm CineWhoop. Learn how its 15A AIO board, 1.76-ounce weight, and 2.4GHz ELRS receiver perform in practice.
As Amazon Associates, we earn from qualifying purchases. This means we may receive a small commission at no extra cost to you if you click through and make a purchase.
As an Amazon Associate we earn from qualifying purchases. Links on this page are affiliate links.
This vfswowl talon 2in 106mm cinewhoop review covers a compact multirotor built for tight indoor and outdoor flights. The model is a 2-inch class cinewhoop built around a 106mm frame size. It is defined by its integrated 15A AIO flight controller and its light 1.76-ounce listed weight. You also get hardware built to fit O3 or ZEUS FPV systems alongside standard ELRS control gear. If you need a small setup with compact dimensions, this published spec sheet outlines the platform hardware clearly.
- 106mm wheelbase designed for 2-inch propeller setups
- Integrated 15A AIO board compatible with O3 and ZEUS FPV gear
- Lightweight listed frame weight of 1.76 ounces
- Available in Analog ELRS 2.4GHz and Power Kit options
Good fit for
This quad suits builders who run 2.4GHz ELRS radio hardware and want a 106mm wheelbase for close-quarters flying. If you plan to install an O3 air unit or ZEUS FPV quad parts, the 15A AIO setup matches those components directly. Pilots needing a lightweight airframe will also benefit from its 1.76-ounce listed weight, keeping your overall build nimble for navigating tight areas.
Who can skip it
You should skip this model if you want a larger freestyle drone with high-current electronics, as the 15A AIO limit cannot handle heavy power draws. Pilots who fly standard Crossfire, FrSky, or alternative control links without ELRS 2.4GHz hardware should look elsewhere. It is also unsuitable if you require larger than 2-inch props or a frame wider than 106mm for high-speed open-field flying.
Verdict
The Vfswowl Talon 106mm CineWhoop provides a targeted 1.76-ounce platform with a 15A AIO board for compact 2-inch FPV builds. It gives ELRS and O3 builders a dedicated micro frame without unnecessary weight.
Key Specifications and Real-World Meaning
Size: Analog ELRS 2.4GHz
This configuration links an analog video feed with an ExpressLRS 2.4GHz control receiver. You get open-source radio control known for high packet rates and dependable link range. Pilots flying with standard 5.8GHz analog goggles benefit from immediate low-latency video without needing expensive digital gear. Compare this to DJI digital systems or FrSky receivers when checking signal stability and monitor compatibility.
15A AIO
An all-in-one board combines the flight controller and a 15-amp electronic speed controller on a single circuit board. This setup reduces internal wiring and cuts overall mass inside compact frames. FPV pilots who want responsive throttle handling in tight gaps benefit from this layout. When shopping around, compare 15A ratings to heavier 20A or 30A stacks designed for bigger power draws.
Wheelbase: 106mm
The 106mm measurement describes the diagonal distance between opposite motor centers. This footprint keeps the craft maneuverable in confined backyards or indoor rooms while protecting furniture with ducted guards. Beginners and indoor cinematographers gain predictable handling through small doorways. Compare this 106mm layout against larger 120mm cine micro-drones or sub-85mm tiny whoops to balance stability against flight agility in cramped areas.
Weight: 1.76 ounces
Weighing 1.76 ounces (roughly 50 grams), this airframe stays exceptionally light before attaching a flight battery. Lower overall mass demands less throttle to hover and minimizes crash damage during rough landings. Recreational pilots who fly indoors will appreciate the gentle momentum around walls. Compare this 1.76-ounce build against sub-250-gram commercial camera drones to judge indoor safety versus outdoor wind resistance.
Frame Design and Hardware Layout
The Vfswowl Talon 2in 106mm CineWhoop is structured around an integrated 15A AIO board layout built to accommodate 2-inch propellers. According to the listing, the unit measures 0.39 inches long, 0.39 inches wide, and 0.39 inches high in its published specifications. This miniature footprint is designed to navigate confined indoor corridors and narrow flight paths where standard quads cannot venture.
At 1.76 ounces, the frame remains lightweight, which supports agile maneuvering and responsive throttle handling during slow, precision cine passes. The model carries part number Vfswowl564654 and comes in a single One Color exterior finish. According to the listing, the airframe is also built to fit O3 ZEUS FPV quad components, providing dedicated structural mounting spacing if you plan to install that specific hardware stack.
The model is listed in two distinct size variations, including a complete Analog ELRS 2.4GHz configuration and a standalone Power Kit. The Analog ELRS variation mounts your flight receiver directly onto the platform, giving you a ready control interface. If you prefer to supply your own radio receiver and video transmission equipment, the Power Kit build gives you the baseline physical framework.
Setup Procedures and Daily Operation
Setting up the Vfswowl Talon 2in 106mm CineWhoop Drone depends on the version you select. The primary variation features an Analog ELRS 2.4GHz configuration, requiring you to bind the internal ExpressLRS receiver to a matching 2.4GHz radio controller. You also tune your analog monitor or goggles to the drone's video transmitter channel. If you choose the Power Kit option, setup requires adding your own receiver and video system before flight.
Hardware compatibility centers around the integrated 15A AIO board. The listing indicates this platform is fit for O3 units and ZEUS hardware. Installing an O3 digital unit requires mounting it within the compact 106mm layout while respecting the current boundaries of the 15A electronic speed control.
In routine operation, managing power draw is essential. The 15A AIO board is sized for compact 2-inch setups, so your battery choices must align with that rating. At an overall weight of 1.76 ounces, packing the quad for transit requires minimal space. You can deploy it quickly in small flying spaces, provided you maintain your 2.4GHz control link and keep the hardware within its specified 15A limits during every flight.
Before Buying the Vfswowl Talon 2in
Before selecting this drone, verify which variation fits your existing setup. The listing provides two size choices: Analog ELRS 2.4GHz and Power Kit. If you pick the Analog ELRS option, you need equipment matching the 2.4GHz ExpressLRS protocol and standard analog gear. For the Power Kit, ensure you have the remaining flight components ready to complete the build. Check your hardware requirements as well. The listing notes compatibility with O3 and ZEUS FPV Quad hardware on this 106mm frame. Routine upkeep involves checking the 106mm structure and monitoring the integrated 15A AIO board on this 1.76-ounce craft. Across 1 options in Drones & Action Cameras, this 2-inch CineWhoop suits users seeking a compact FPV model rather than an all-in-one consumer camera craft. Confirm your equipment matches the specs before flying.
Check before you buy
- Choose between the Analog ELRS 2.4GHz and Power Kit variations.
- Verify your radio controller supports 2.4GHz ELRS if choosing that size.
- Check compatibility if you plan to install O3 or ZEUS FPV Quad gear.
- Ensure your equipment matches the integrated 15A AIO electronics.
Vfswowl Talon 2in 106mm CineWhoop Drone
Best for: lightweight 2-inch ELRS cinewhoop builds
- Dimensions
- 0.39 × 0.39 × 0.39 inches
- Weight
- 1.76 ounces
The Vfswowl Talon is a 106mm 2-inch cinewhoop drone built for compact FPV flying. It includes a 15A AIO board and has a weight of 1.76 ounces. Configured with an Analog ELRS 2.4GHz setup and designed to fit O3 ZEUS gear, it gives you a lightweight platform suitable for tight spaces and indoor maneuvering.
- Lightweight frame weighing 1.76 ounces
- Integrated 15A AIO board
- Equipped with 2.4GHz ELRS receiver
- Designed to fit O3 ZEUS FPV hardware
- 15A AIO rating limits current capacity for larger motor setups
- Comes in only one color option
- Does not list an included flight battery
- You fly using an ELRS 2.4GHz transmitter protocol.
- You want a sub-2-ounce 106mm frame for tight spaces.
- You plan to integrate O3 ZEUS quad components.
- You require an ESC configuration rated higher than 15A.
- You want a package that includes a flight battery.
Verdict: Vfswowl Talon 2in 106mm CineWhoop Drone fits pilots who need a 1.76-ounce platform with an integrated 15A AIO board and ELRS 2.4GHz control. It provides the mounting clearances you need to build around O3 ZEUS hardware.
Specifications side by side
| Spec | Vfswowl Talon 2in 106mm CineWhoop Drone |
|---|---|
| Dimensions | 0.39 × 0.39 × 0.39 inches |
| Weight | 1.76 ounces |
| Size | Analog ELRS 2.4GHz |
| Color | One Color |
| Model | Vfswowl564654 |
Frequently asked questions
What is the weight of the Vfswowl Talon 2in CineWhoop?
The Vfswowl Talon 2in 106mm CineWhoop Drone weighs 1.76 ounces. This light overall mass helps preserve agile flight handling across tight indoor courses or small outdoor areas. It also reduces inertia during sudden maneuvers, allowing the integrated 15A AIO board and matching power components to operate effectively without carrying excessive frame burden.
What flight controller board comes in the Vfswowl Talon 2in?
This cinewhoop includes an integrated 15A AIO board. An all-in-one flight controller consolidates the core electronic speed controllers and central processing unit onto a single circuit assembly. This layout reduces internal cabling, minimizes overall weight to 1.76 ounces, and maintains the required clearances for compact hardware installations like O3 ZEUS components.
Can the Vfswowl Talon 2in CineWhoop fit O3 ZEUS hardware?
Yes, the Vfswowl Talon 2in provides the mounting clearances necessary to build around O3 ZEUS hardware. Its 106mm cinewhoop frame layout accounts for the physical footprint required by these specific camera and transmission components. This allows you to integrate your preferred digital video systems without running into internal frame obstruction issues.
What receiver protocol does the Vfswowl Talon 2in use?
The primary size variant uses an ExpressLRS 2.4GHz control protocol. ELRS operates on the 2.4GHz radio frequency to deliver dependable command inputs with high link reliability. To pilot the drone using this integrated setup, you will need a matching 2.4GHz ELRS radio transmitter configured to connect with the on-board receiver hardware.
What are the published physical dimensions of this cinewhoop?
According to the manufacturer data, the model Vfswowl564654 lists measurements of 0.39 inches long, 0.39 inches wide, and 0.39 inches high. It is built as a 106mm wheelbase frame sized for 2-inch propellers. This compact form factor lets you pilot through tight gaps and navigate cramped indoor spaces safely.
Who is the Vfswowl Talon 2in 106mm CineWhoop best for?
The Vfswowl Talon 2in is best for pilots looking for lightweight 2-inch ELRS cinewhoop builds. If you need a 1.76-ounce platform with an integrated 15A AIO board and mounting clearances for O3 ZEUS gear, this craft provides that exact hardware foundation for responsive, low-profile FPV flights.
